Cables

CAATWXLH4FPAD

Remote Audio input cable for Audio-Technica ATW-T1801. Line Level XLRF padded to Mic Level on 4 pin Hirose Female. 18 inches

$48.00

CAAVCIV

Aviation Cable. Intercom interface adapter for US civilian fixed wing aircraft. Allows audio tap of two-way communications.

$45.00

CAAVMIC

Military Aviation Cable. Intercom interface adapter for civilian helicopters, all military fixed wing aircraft and all military helicopters. Allows audio tap of two-way communications.

$80.00

BDSINVL

BDS power input cable for BDS from V-Lock adapter.

$195.00

BDSINBAUER

BDS power input cable for BDS from Anton Bauer Power Tap.

$60.00

BDSINANPAG

BDS power input cable for BDS from Anton Bauer "brick" battery. PAG 2 pin connector.

$101.00

BDSIN

BDS power input adapter with 4-pin male XLR. 4".

$18.50

BDSINBP

BDS power input cable for BDS from BP-90 battery, 6" Center negative.

$18.50

BDSCL33

BDS power outlet cable with locking molded right-angle plug. For use with Lectro 185-195D, 201, 211, 411 rcvrs & FP-33/32A mixer/ Lectro Battery eliminator, Tascam HDP2. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$32.00

BDSCL33Y

BDS power output "Y" cable w/right angle plug (center pin positive). For use with Lectro IFBT1, 185-195D, 200, 201, 205, 210, 211, 411 rcvrs & FP-33/32A mixer/ Lectro Battery eliminator and SHURE UP4.

$58.00

BDSCL200

Discontinued: See BDSCL33

BDSCSQN

BDS Power Output Cable with locking molded right-angle plug for the Wendt X5, the PSC M4 MkII, the Sennheiser 3041U, the SQN-4S Mixer, the Sound Devices 744T, 722, 702, 702T, 442 Version 2, and the latest version of the Sound Devices MixPre. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$46.50

BDSCC104

BDS power output cable with locking molded right-angle plug and 4 pin XLR female (pin 4+ / pin 1-). For use with Cooper CS-104 Mixer, HHB and Fostex DAT recorders, and more. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$32.00

BDSCFR2

BDS Power Output cable for FOSTEX FR-2.

$46.50

BDSCZENG

BDS power outlet cable with locking molded right-angle plug. For use with Zaxcom 1st Generation Stereoline ENG. 24 inches. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$32.00

BDSCM4

BDS Single Pin Output Cable for PSC M4 series, Wendt X4, Wendt X2, and Shure FP-31 and 32 mixers. WARNING: This cable should NOT be used with the FP-33 or FP-32A.

$32.00

BDSCADAP1

Regulated voltage cable with locking molded right-angle plug: BDS to Tascam DA-P1. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$129.00

BDSCSD

BDS power cable with locking molded right-angle plug for Sound Devices HX-3, MM-1, MP-2, and early versions of Sound Devices MixPre and 442. Coaxial type connector. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$32.00

BDSCSX

BDS power output cable to Sonosax SX-8 Mixer.

$70.00

CABETACCOPLUS

ENG Breakaway camera end only. DELUXE VERSION Heavy duty Neutrik 3-pin male XLRs w/ gold contacts, Neutrik gold R/A 1/8 in., and stereo plug for return monitoring.

$140.00

CABETACCS104

Beta Break-away with return for Sound Devices 442, Cooper CS-104 mixer, PSC AlphaMix & M3, Filmtech LSP4 mixer and Audio Development 261 mixer. 10-pin Hirose connector on mixer end.

$215.00

CABETACCS104PLUS

ENG Breakaway cable, DELUXE VERSIONHirose10-pin connector on mixer end, and heavy duty Neutrik 3-pin male XLRs with gold contacts, Neutrik gold right angle 1/8 inch stereo plug for return monitoring), for SD442, PSC M3 and AlphaMix, Cooper CS-104, Fostex PD-6, Audio Developments AD261, Deva 4 and 5. 8-pin Neutricon connectors for breakaway and extension additions. 20 feet total length.

$249.00

CABETACFP33

Beta Break-away with return for Sound Devices 302 & Mix Pre, Shure FP-33/32A and Wendt NGSX2 mixers. 2 female XLRs and 1 straight stereo mini on mixer end.

$215.00

CABETACM4

Beta Break-away with return for PSC M-4A+ and Wendt X4 & X5 mixers. Quick-release 12-pin Hirose connector on mixer end.

$215.00

CABETACM4MKII

Beta Break-away with return for PSC M4 MkII mixer. 10-pin Hirose connector on mixer end.

$215.00

CABETACAD260

Beta Break-away with return for Audio Developments 260 mixer.

$215.00

CABETACAT4462

Beta Break-away with return on male 3 pin XLR for Audio-Technica AT4462 mixer.

$215.00

CABETACCO

Standard camera end break-away section only; 2'.

$125.00

CABETAMIX

Beta Break-away mixer end only with 10-pin connector. For the Cooper CS104, PSC M4 MKII, and Filmtech LSP4 mixers.

$145.00

CABETAMIXPLUS

ENG BreakAway mixer end only w/ 10-pin Hirose connector. DELUXE VERSION. For SD442, PSC M3, AlphaMix, Cooper CS-104, Fostex PD-6, Deva 4 & 5. 17 Feet.

$169.00

CABETAC5

Break-away, for HD cameras. Camera end only with 5 pin playback adapter for stereo return monitoring. Monitoring is Post Dolby noise reduction.

$105.00

CABETAC20

Beta Break-away, camera end only with 20-pin playback adapter for stereo return monitoring. Monitoring is post Dolby noise reduction.

$145.00

CABETACRCVR

Beta Break-away section for camera mounted receivers. Outputs of receivers interface with camera end breakaway section to feed audio into the Betacam.

$110.00

CABETAC20A

Beta Break-away camera end to 20-pin adapter. Adapts standard camera end break-away section 1/8" to the cameras 20-pin connector for stereo return.

$82.00

CABETAOPT1

Option 1: Mixer end disconnect. Installation of additional 8-pin Neutricon at mixer end resulting in a three section cable: mixer, extension, and camera sections.

$60.00

CABETAEXT25

25' Extension cable for Beta Break-Away.

$115.00

CABETAEXT50

50' Extension cable for Beta Break-Away.

$175.00

CABETAEXT75

75' Extension cable for Beta Break-Away.

$205.00

CABNCRCA

BNC to RCA adapter. 12 inches.

$18.00

CABNC50M8100

BNC antenna cable, 50 ohm, low loss Belden MINI-8, 100'.

$55.00

CABNC50M815

BNC antenna cable, 50 ohm, low loss Belden MINI-8, 15'.

$22.00

CABNC50M825

BNC antenna cable, 50 ohm, low loss Belden MINI-8, 25'.

$25.00

CABNC50M850

BNC antenna cable, 50 ohm, low loss Belden MINI-8, 50'.

$46.00

CABNCVID25

25' BNC Video Cable, Canare LV61S, Specify Color (Black or Red)

$22.00

CABNCVID50

50' BNC Video Cable, Canare LV61S, Specify Color (Black or Red)

$38.00

BCSMF

3' Mixer end fan-out for Boom Cable System w/TB.

$105.00

BCSMFMONO

3' Mixer end fan-out for Boom Cable System w/TB. MONO (Cooper 106)

$105.00

BCSXLRAD

XLR Adapter Set. Turns Boom Cable System Extension Cables into a 2-pair snake.

$100.00

BCSX125

125' Starquad extension (with 8 pin Neutricon connectors) For use with Remote Audio Boom Cable System w/TB.

$220.00

BCSX75

75' Starquad extension (with 8 pin Neutricon connectors) For use with Remote Audio Boom Cable System w/TB.

$167.00

CA3PS26

Shielded 3-pair Audio Cable (2 conductor w/ shield) 26 AWG.

$1.80 per foot

CACC4PLUS1

Coiled Cable. 3.65 ft relaxed, 16+ ft expanded. 5 shielded conductors, including 1 conductor separately shielded. 16.50mm OD, 26 ga.

$28.00

CACOMRO

Comtek receiver out to RCA male w/RF trap for video assist.

$35.00

CACOMXMIT

Comtek M-72L transmitter XLR Input cable with RF trap.

$32.00

CA1/4RAMM1/8MM

Comtek Receiver to Denecke Slate (right angle 1/4" mono plug to 1/8" mono plug); 30".

$18.00

BCSX50

50' Starquad extension (with 8 pin Neutricon connectors) For use with Remote Audio Boom Cable System w/TB.

$135.00

BCSX75

Boom Cable System Extension 75' StarQuad with 8-pin Neutricon connectors.

$167.00

BCSX125

Boom cable system extention 125' Starquad (with 8 pin Neutricon connectors)

$220.00

CADPLXBOX

Duplex Boom Cable Modular System, duplex box w/ quick disconnect , 8 pin Neutricon, 1/4 TRS & 3-pin XLRF

$76.00

CADPLXFAN

Duplex Boom Cable Modular System, mixer end fan out w/ quick disconnect , 8 pin Neutricon, 1/4 TRS & 3-pin XLRM, 3'.

$55.00

CAMCX3F1/8

DV and Pro-sumer Camcorder Input Cable. Mono microphone input. 3-pin female XLR to mini right angle with DC voltage blocker. 18 inches.

$50.00

CAMCXY

DV and Pro-sumer Camcorder Input Y-Adapter. Left and right 3-pin female XLR's to one 1/8" stereo plug. Includes DC voltaqe blocking capacitor. 18 inches.

$65.00

CAHDX5F1/8FS

Adapter Cable. Adapts Hi Def 5-pin return to standard Beta cable 1/8" return. 5-pin female to 1/8" female stereo jack. Line level. 4".

$21.00

CALOOPKIT

Inductor Loop Kit. Includes flipped polarity 1/4" mono Y adapter, 3 extension cables (25', 50' & 100') and 2 female 1/4" barrel adapters.

$149.00

CALEC100XL

3 pin male XLR to 1/8" right angleTRS, Balanced. 18". For Lectro UCR-100 and Sennheiser EV-500 balanced receiver output.

$22.00

CALEC100XLP

3 pin male XLR to 1/8" right angle TRS. Balanced. 18". -40dB pad. For Lectro UCR-100 and Sennheiser EV-500 balanced receiver

$41.00

CALECTM

Lectrosonics Mic Level, 10db Pad, TA5M - TA5F, 6".

$45.00

CALECTXY

Lectrosonics Y-Cable. Allows one lavalier to feed two transmitters. 14 inches.

$41.00

CALECXL3/5M24

Lectrosonics Input Adapter Cable. XLR3F-TA5F Lectro Mic level, 24" length, BDS compatible. For use w/ balanced 3-pin XLR outputs.

$32.00

CALECXL3/5M48

Lectrosonics Input Adapter Cable. XLR3F-TA5F Lectro Mic level, 48" length, BDS compatible. For use w/ balanced 3-pin XLR outputs.

$32.00

CALEPWRBS

Lectrosonics Power Cable. Power cable from BetaCam or PSC Alpha Mix to one Lectrosonics receiver (Models 185-195D, 201, 205, 210, 211, 411) w/right angle connector.

$45.00

CALEPWRBY

Lectrosonics Power Cable. Y-cable allows powering of two Lectrosonics receivers from a BetaCam 4-pin Hirose output. Works with UCR185-195D and UCR201, 205, 210, 211, 411. Right angle Lectro connector.

$60.00

CALECTA3/5L

TA3F to TA5F Lectro Line level, BDS compatible. For use w/ balanced mini-XLR (TA-3) outputs such as the Sound Devices 442, PSC Alpha-Mix, Wendt X5, 18".

$32.00

CALECTA3/5M

TA3F to TA5F Lectro Mic level, BDS compatible. For use w/ balanced mini-XLR (TA-3) outputs such as the Sound Devices 442, PSC Alpha-Mix & Wendt X5. 18".

$32.00

CALECXL3/5L

XLR3-F - TA5F Lectro Line level, BDS compatible. For use w/ balanced 3-pin XLR outputs, 18".

$32.00

CASDTYLEC

Sound Devices 302/402 tape out to (2) Lectrosonics transmitters. 'Y' cable. TA3F - (2) TA5F, Lectro Line Level. 18".

$45.00

NPADCL33

NP-1 Adapter Cup with Single Pin for Lectro IFBT1,185-195D, 200D, 201, 205, 210, 211, 411 rcvrs, SHURE UP4 & FP-33/32A mixer/ Lectro Battery eliminator. 24"

$60.00

NPADCM4

NP-1 Adapter Cup with Single Pin for Shure FP32, Wendt X4, Wendt X2, PSC M4, PSC M3. Center Pin NEG.

$60.00

NPADCSD

NP-1 Adapter Cup with Single Pin for old MixPre, 442, HX-3, MM1.

$60.00

NPADCSQN

NP-1 Adapter Cup with 4-Pin Hirose for Wendt X5, Second Generation of MixPre, 442, HX-3, MM1, PSC M3, M4mkII, and Alphamix.

$75.00

NPADDAP1

NP-1 Adapter Cup to DA-P1 regulated power cable, 36"

$159.00

NPADFR2

NP-1 Adapter Cup to Fostex FR-2. 24"

$75.00

NPADPT

NP-1 Adapter Cup pig-tailed to tinned leads.

$55.00

NPADWX4

NP-1 Adapter Cup to 4 pin XLR female adaptor, cable is 24

$60.00

NPADZAX

NP-1 Adapter Cup with Single Pin for Zaxcom ENG wireless receiver. Straight locking connector. 24"

$60.00

CAXLRQN3

XLR Cable, StarQuad, Black; 3'.

$23.00

CAXLRQN10

XLR Cable, StarQuad, Black; 10'.

$28.00

CAXLRQN25

XLR Cable, StarQuad, Black; 25'.

$38.00

CAXLRQN50

XLR Cable, StarQuad, Black; 50'.

$58.00

CAXLRQN100

XLR Cable, StarQuad, Black; 100'.

$88.00

CAXLRQT10

XLR Cable, StarQuad, Thin Black; 10'.

$25.00

CAXLRQT25

XLR Cable, StarQuad, Thin Black; 25'.

$35.00

CAXLRQT50

XLR Cable, StarQuad, Thin Black; 50'.

$55.00

CAXLRQT100

XLR Cable, StarQuad, Thin Black; 100'.

$85.00

CASN2PXL

StarQuad 2 pair XLR snake with color-coded fan-outs; $55 plus $1.50 per foot (25' minimum).

$93.00

CASNSQ4PXL

StarQuad 4 pair XLR snake with color-coded fan-outs; $93 plus 1.90 per foot (25' minimum).

$140.00

CAX3F1/8MM

XLR-3F to mini mono; 18".

$18.00

CAX3FRCA

XLR-3F to RCA male; 12".

$18.00

CAX3M1/4MMRA

XLR-3F to 1/4" mono right angle plug (for Denecke TS-1/TS-2 Input & TS-2 jam) 12".

$21.00

CAX3YMMF

XLR "Y Cable" (1 female, 2 males); 8".

$25.00

CAX5QN25

5 PIN XLR StarQuad cable, for stereo; 25'.

$45.00

CAXF1/4J18

Female XLR to 1/4" TRS, 18".

$25.00

CAXF1/4J36

Female XLR to 1/4" TRS, 36".

$28.00

CAXJ18

XLR Jumper, 18"; Add $5 For Each Right Angle.

$18.00

CAXJB

Boom suspension isolation XLR jumper, StarQuad, short (416, Schoeps, etc.).

$25.00

CAXJBL

Boom suspension isolation XLR jumper, StarQuad, long (MKH-70, KMR-82, etc.).

$25.00

CAXJCOIL

Coiled Boom Jumper XLR Cable, 7' expanded.

$48.00

CAXJCOIL2

Coiled Jumper XLR Cable, 18" expanded.

$35.00

CAXJCOILST

STEREO Coiled Boom Jumper Cable. R/A 5-pin female XLR to straight 5-pin male XLR. 2' contracted, 7' extended.

$52.00

CAXM1/4J18

XLR M to 1/4" TRS, 1 & 3 shorted, 18".

$25.00

CAXSTE

Stereo Cable. 5-pin female XLR to a pair of 3-pin males (left and right). Mogami Cable with Neutrik connectors. 18".

$40.00

CAXSTECOIL

Stereo Cable. 5-pin female XLR to a pair of 3-pin males (left and right). Coiled cable. 7 feet extended.

$68.00

CAMCXY

Mini-cam Input Y adapter; two XLR females, one 1/8" stereo plug.

$65.00

CAMCX3F1/8

Mini-cam input cable. XLR-3F to mini stereo right angle w/DC blocking capacitor, wired mono; 18" (Add $5 for right angle XLR).

$50.00

CA1/4M2

1/4"M to 1/4"M Mono Cable. 2 feet.

$13.00

CA1/4STM6

1/4"M to 1/4"M stereo cable. 6 feet.

$16.00

CASENEK100

Sennheiser Adapter Cable. Adapts output of Evolution Series Sennheiser EK100 receiver from an 1/8" mini threaded connector to a 3-pin male XLR. 18 inches long.

$28.00

CASENEK100XL24

Sennheiser EK100 Series Transmitter(1/8" mini threaded) to XLR3F, Line Level, 24"

$28.00

CASENEK100XM48

Sennheiser EK100 Series Transmitter, (1/8" mini threaded) to 3-pin Female XLR, 48", Mic Level.

$32.00

BCSBBSXST

Remote Audio Boom Box for Boom Cable System/Sonosax SXST. Designed specifically for the Sonosax SX-ST mixer, in addition to connecting the boompole to the boom cable, this belt worn box allows private 2-way communication between the Recordist and the Boom Operator via the boom cable. Learn more about the Sonosax SX-ST communications system.

$195.00

Required Accessories Include:

BCSX75

Remote Audio Boom Cable System Extension 75' StarQuad with 8-pin Neutricon connectors.

$167.00

REM BCSX125

Remote Audio Boom Cable System Extension 125' StarQuad with 8-pin Neutricon connectors.

$220.00

BCSHSOCSXST

Sony MDR-7506 Modified Headset w/Talk-Back Microphone. FOR USE WITH SONOSAX BOOM CABLE SYSTEM BOX.

$250.00

BCSMFSXST

Mixer End Fan-Out for Remote Audio Boom Cable System w/Talk-Back specifically for SONOSAX SX-ST mixer.

$105.00

Optional Accessories:

CASXST05

Headset Harness for Sonosax SX-ST (Works with standard Remote Audio Boom Cable System Headphones) 5-pin Binder to 1/4 inch TRS headphone jack and XLR3-F slate and TB mic input. 1-meter.

$85.00

CASXMINI01

Line input or Dynamic mic input Cable for Sonosax MINIR82. Pair, 2-XLR3-F to 2-Binder 8-pin-M. 24 inches.

$75.00

CASXMINI02

Sanken COS-11 Black Lavaliere mic wired with 8-pin Binder Male for use with Sonosax MINIR82. Includes rubber mount and tie clip. 6 feet.

$345.00

CA744AESIN

Remote Audio Cable for Sound Devices 744T: AES IN. 2 XLR3F to 2 unbalanced BNC. 48 inches overall length.

$68.00

CA744INL

Remote Audio Cable for Sound Devices 744T: Channel 3 & 4 input. 2 XLR3F to 2 TA3F Line level only. 48 inches overall length.

$68.00

CA744INLTA3

Remote Audio Cable for Sound Devices 442 to 744T. Channel 3 & 4 input. (2) TA3F to (2) TA3F Line level only. 48 inches overall length.

$68.00

CA744SPDIFIorO

Remote Audio Cable for Sound Devices 702T and 744T: SPDIF IN or OUT. (2) RCA-M to (2) unbalanced BNC. 48 inches overall length.

$68.00

CATCIO

Timecode- LEMO to in/out XLR-3F & XLR-3M. 3 feet with 12 inch fans. For use with Deva 4 & 5, Sound Devices 744T, Nagra IVSTC, V, HHB Portadrive.

$68.00

CATCIOBNC

Remote Audio Timecode Cable - 5 pin LEMO to in/out to (2) BNC-Male. 3 feet.

$90.00

CA744XLRLO

Remote Audio Cable for Sound Devices 744T: XLR OUT. 2 XLR3M to 2 TA3F Line level. 48 inches overall length.

$68.00

CA744XLRMO

Remote Audio Cable for Sound Devices 744T: XLR OUT. 2 XLR3F to 2 TA3F Mic level. 48 inches overall length.

$68.00

CAH2TRY1

Remote Audio Transcription Cable for Zoom H2. 1/8 inch TRS Y to (2) XLR Females. 18 inches per leg. 50db pad on Left channel. Label pad side Timecode, Label standard XLR Mic Level.

$68.00

CAH2TRY2

Remote Audio Transcription Cable for Zoom H2. 1/8 inch TRS Y to (1) XLR Female and (1) BNC Male. 18 inches per leg. 50db pad on BNC (left). Label pad side Timecode, Label standard XLR Mic Level.

$68.00

CACADEVADOI

Cameo AES Direct Outs (also called DA98 outs) to Deva IV & V AES in. (Sub D to Sub D). 3 feet.

$60.00

CADEVAESCA

Deva IV & V AES Outs to Cameo Digital Returns 1-6 (Sub D to Sub D). 3 feet.

$55.00

CADEVO4/5

Deva IV & V Analog Outs (6) to XLR (Sub D to XLR-3M). 3 feet with 12 inch fans.

$105.00

CATCIO

Timecode- LEMO to in/out XLR-3F & XLR-3M. 3 feet with 12 inch fans.

$68.00

CATCIOBNC

Remote Audio Timecode Cable - 5 pin LEMO to in/out to (2) BNC-Male. 3 feet.

$90.00

CAZBETAIFB

Zaxcom IFB cable From Camera. Y cable - 1/8 TRS-M to 1/8 TRS-F and TA5F. Fan 3 inches. Overall length 14 inches. For use with IFB100/STA100.

$48.00

CAZSTA100TA3YTA5

Remote Audio Cable for mixer out to Zaxcom STA100. (2) TA3-F 'Y' to TA5F. 18 inches.

$32.00

CAZTA3LELS

2 - TA3F to 2 - 4-pin Lemo, for use with Zaxcom Stereoline transmitters,18 inches. Stereo Pair. Line lvl.

$109.00

CAZTRX900TC

Remote Audio Timecode Jam Cable for Zaxcom TRX900, XLR3F line to mic pad to 3 pin Lemo. 12 inches.

$60.00

CAZXL3LELS

2 - XLR3F to 2 - 4-pin Lemo, for use with Zaxcom Tx. Line Lvl. 18 inches.

$109.00

CAZXSTE

Y cable: 5-pin R/A XLRF to two 3-pin XLRM, 1 LEG 12 INCHES, 1 LEG 14 INCHES.

$40.00

CAZPCAM

Zaxcom Stereoline power cable from Camera. 4-pin HRS - 2.5mm x 5.5mm DC plug. 10 inches.

$45.50

NPADZAX

NP-1 Adapter Cup with Single Pin for Zaxcom ENG wireless receiver. cable is 24 inches. Straight locking dc connector.

$60.00

BDSCZENG

BDS power outlet cable with locking molded right-angle plug. For use with Zaxcom 1st Generation Stereoline ENG. 24 inches. The improved design will help to reduce the overall profile of the BDS when cables are attached.

$32.00