| Betacam
Breakaway Cable. |
CABETACCS104 |
| BDS
Power Cable (Original 442 with single pin power connection). |
BDSCSD |
| BDS
Power Cable (New 442 with Hirose 4-pin power connection). |
BDSCSQN |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Unbalanced
Tape Out on TA3F connector to R/A 1/8" mini. |
CASDT |
| Tape out to (2) Lectrosonics transmitters. 'Y' cable. TA3F - (2) TA5F, Lectro Line Level. 18". |
CASDTYLEC |
| "Y"
Cable. Mix Out / Tape
Out on TA3F connector to (2) XLR3M. 12". |
CASD442TOY |
| Tape
Out on TA3F connector to R/A 1/8" mini, WIRED MONO. |
CASDTM |
| Unbalanced
1/8" stereo transcription tape output cable (Consumer line
level, -10dB) with built-in -50dB Mic Pad. |
CAFPTPAD |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| Secondary
Main Left and Right Outputs on Mini-XLRs. |
CASD442LO |
| Direct
Outs. |
CASD442LO |
| Link
two 442 or 302/442 mixers. |
CASDL |
| Link
output of FP33 OR Sound Devices MixPre into the Sound Devices 442.
(2) XLR-F to (1) TA3-F, Line level, 18 inches. |
CASDLFP33 |
| NP-1
Power Adapter Cup. Older units with single pin power input. |
NPADCSD |
| NP-1
Power Adapter Cup. Newer units with 4-pin Hirose power input. |
NPADCSQN |
| TA3F
to TA5F Lectro Line level, 18" length, BDS compatible. For
use w/balanced mini-XLR (TA-3) outputs. |
CALECTA3/5L |
| TA3F
to TA5F Lectro Mic level, 18" length, BDS compatible. For use
w/balanced mini-XLR (TA-3) outputs. |
CALECTA3/5M |
| Cable for use with Sound Devices mix out/tape out, TA3F - Stereo Summed to TA5F for use with Lectrosonics transmitters. 18 inches. |
REM CASDT3/5> |
 Sound
Devices MIX PRE |
| Betacam
Breakaway Cable. |
CABETACFP33 |
| BDS
Power Cable (Original MixPre with single pin power connection). |
BDSCSD |
| BDS
Power Cable (New MixPre with Hirose 4-pin power connection). |
BDSCSQN |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Link
output of FP33 OR Sound Devices MixPre into the Sound Devices 442.
2 - XLR-F to 1 - TA3-F, Line level, 18 inches. |
CASDLFP33 |
| Unbalanced
1/8" stereo Transcription Tape Out (Consumer Line Level,
-10dB) with -50dB Mic Pad. |
CAFPTPAD |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| NP-1
Power Adapter Cup. Older units with single pin power input. |
NPADCSD |
| NP-1
Power Adapter Cup. Newer units with 4-pin Hirose power input. |
NPADCSQN |
| Wendt
X2 |
| Betacam
Breakaway Cable. |
CABETACFP33 |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| BDS
Power Cable. |
BDSCM4 |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| NP-1
Power Adapter Cup. |
NPADM4 |
| Wendt
X4 |
| Betacam
Breakaway Cable. |
CABETACM4 |
| BDS
Power Cable. |
BDSCM4 |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| NP-1
Power Adapter Cup. |
NPADM4 |
| Wendt
X5 |
| Betacam
Breakaway Cable. |
CABETACM4 |
| BDS
Power Cable. |
BDSCSQN |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| Line
Out (A) Secondary Main Left and Right Outputs on Mini-XLRs. |
CAXMTA3F |
| NP-1
Power Adapter Cup. |
NPADCSQN |
| TA3F
to TA5F Lectro Line level, 18" length, BDS compatible. For
use w/balanced mini-XLR (TA-3) outputs. |
CALECTA3/5L |
| TA3F
to TA5F Lectro Mic level, 18" length, BDS compatible. For use
w/balanced mini-XLR (TA-3) outputs. |
CALECTA3/5M |
| Cooper
CS-104 |
| Betacam
Breakaway Cable. |
CABETACCS104 |
| BDS
Power Cable. |
BDSCC104 |
| Direct
out for Cooper CS104-4T modification. 1 thru 4 fan: Hirose 12 pin
to 4 - XLRM 3-pin, 9" FAN, 27" overall length. |
CACS104DO |
| Unbalanced
3-pin mini-XLR stereo transcription tape out (Consumer Line Level,
-10dB). |
CACS104TP |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| Unbalanced
3-pin mini-XLR secondary left or right output to Comtek
transmitter. |
CACS104UCOM |
| Unbalanced
3-pin mini-XLR secondary left or right Outputs. |
CAXMTA3F |
| Main
left and right outputs on 3-pin XLR male connectors |
ANY
STANDARD XLR CABLE |
| Link
Shure FP33 to CS-104. |
CAFP33CS104MX |
| NP-1
Power Adapter Cup. |
NPADWX4 |
| Shure
FP32A, FP33 |
| Betacam
Breakaway Cable. |
CABETACFP33 |
| BDS
Power Cable. |
BDSCL33 |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Link
output of FP33 OR Sound Devices MixPre into the Sound Devices 442.
2 - XLR-F to 1 - TA3-F, Line level, 18 inches. |
CASDLFP33 |
| Unbalanced
1/8" stereo transcription tape output cable (Consumer line
level, -10dB) with built-in -50dB Mic Pad. |
CAFPTPAD |
| Audio
Output to 2 Lectrosonics Belt pack Transmitters from Mix Bus. |
CAFPMXY |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| NP-1
Power Adapter Cup. |
NPADCL33 |
| AC
Power Supply. |
SHU
PS20 |
| PSC
M-4A+ |
| Betacam
Breakaway Cable. |
CABETACM4 |
| BDS
Power Cable. |
BDSCM4 |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| NP-1
Power Adapter Cup. |
NPADM4 |
| PSC
M4 MkII |
| Betacam
Breakaway Cable. |
CABETACMKII |
| BDS
Power Cable. |
BDSCSQN |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| Wireless
Power Output for Lectrosonics 180 series, 190 series, and 201
series receivers. |
CALEPWRBS |
| Wireless
Power Output for Lectrosonics 200 series receivers (excluding the
201). |
CALEPWRBS200 |
| Wireless
Power Output Y-cable for powering 2 Lectrosonics 180 series, 190
series, or 201 series receivers. |
CALEPWRBY |
| Wireless
Power Output Y-cable for Lectrosonics 200 series receivers
(excluding the 201). |
CALEPWRBY200 |
| NP-1
Power Adapter Cup. |
NPADCSQN |
| PSC
M3 |
| Betacam
Breakaway Cable. |
CABETACCS104 |
| BDS
Power Cable. |
BDSCSQN |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| Wireless
Power Output for Lectrosonics 180 series, 190 series, and 201
series receivers. |
CALEPWRBS |
| Wireless
Power Output for Lectrosonics 200 series receivers (excluding the
201). |
CALEPWRBS200 |
| Wireless
Power Output Y-cable for powering 2 Lectrosonics 180 series, 190
series, or 201 series receivers. |
CALEPWRBY |
| Wireless
Power Output Y-cable for Lectrosonics 200 series receivers
(excluding the 201). |
CALEPWRBY200 |
| Mix
bus out to 2 Lectrosonics Transmitters. |
CAFPMXY |
| NP-1
Power Adapter Cup. |
NPADCSQN |
| PSC
AlphaMix |
| Betacam
Breakaway Cable. |
CABETACCS104 |
| BDS
Power Cable. |
BDSCSQN |
| 1/8"
stereo mini to stereo right angle mini plug, for Tape Out. |
CAFPT |
| Balanced
Line Level 3-pin XLR Audio Output to Lectrosonics Belt pack
Transmitter. |
CALECXL |
| Wireless
Power Output for Lectrosonics 180 series, 190 series, and 201
series receivers. |
CALEPWRBS |
| Wireless
Power Output for Lectrosonics 200 series receivers (excluding the
201). |
CALEPWRBS200 |
| Wireless
Power Output Y-cable for powering 2 Lectrosonics 180 series, 190
series, or 201 series receivers. |
CALEPWRBY |
| Wireless
Power Output Y-cable for Lectrosonics 200 series receivers
(excluding the 201). |
CALEPWRBY200 |
| Direct
Outs. |
CAXMTA3F |
| Unbalanced
3-pin mini-XLR mono line out to standard 3-pin XLR. |
CAXMTA3F |
| NP-1
Power Adapter Cup. |
NPADCSQN |
| TA3F
to TA5F Lectro Line level, 18" length, BDS compatible. For
use w/balanced mini-XLR (TA-3) outputs. |
CALECTA3/5L |
| TA3F
to TA5F Lectro Mic level, 18" length, BDS compatible. For use
w/balanced mini-XLR (TA-3) outputs. |
CALECTA3/5M |
|
