NiteLite

If you've worked  in this business, you've eventually found find yourself working in the dark, feeling for knobs and straining to see settings you need to adjust quickly. Now take that aluminum mini-light out of your mouth and get the Remote Audio NiteLite.

The NiteLite uses a super bright, high efficiency, white LED starting to pop up in other devices. But that's where the similarity ends...

Each piece of the Remote Audio NiteLite was chosen specifically for film and television production. Several components were custom made just for the NiteLite. For instance, while most LEDs have a very narrow beam, the NiteLite lens has a 50 degree wide dispersion angle for an even glow. This means that a typical ENG sound bag can be evenly lit from about 12".

The extra thin flexible steel shaft was designed to be as small and light weight as possible, but strong. Make even a small twist or bend, and it stays. It is covered with a black, non-scratching, abrasion resistant coating. Our research suggested that 18" was the optimum length for the NiteLite's intended use, so we had the shafts made longer than normal at 18". (Shorter lengths are available by special request.)

The LED bulb is expected to last a life time, and has a current draw of less than 30mA@ 12V DC (relatively insignificant). Its useful operating range of 9VDC to 18VDC (intensity changes slightly within this range).

The NiteLite can be plugged directly into the Remote Audio BDS (Battery Distribution System) box. If ordered with the common 4-pin HRS power connector, it can plug directly into the PSC and SQN portable mixers, and onto the back power tap of many camcorders. Also available with TA-4M (miniature XLR 4-pin), XLR-4M (full-size XLR 4-pin male), and BNC connectors.

Why would we put so much effort into creating the NiteLite for you?
Because "We Know what it's like Out There..."  

Pricing: $49.00 with BDS, TA4M, XLR-4, or BNC connectors;  $74.00 with HRS connector.